General Specifications
AMCOM MMIC Driver Amplifiers provide broadband gain and moderate output power for use as intermediate or driver stages in RF and microwave signal chains. Typical devices cover frequency ranges from near DC up to approximately 20 GHz, with gain commonly between 13 dB and 28 dB and output power reaching roughly 37 dBm depending on the model.
These amplifiers are internally matched to 50 ohms and are offered in several package styles including QFN, bare die, and flange configurations for integration into hybrid modules, microwave assemblies, and test systems.
Driver Amplifiers
AMCOM offers a range of broadband GaAs MMIC driver amplifiers designed for RF and microwave systems requiring stable gain and compact semiconductor packaging. These devices are commonly used to drive higher power amplifier stages or provide intermediate gain within transmit and instrumentation signal chains.
Many models operate across wide frequency bands while maintaining consistent gain and output power characteristics. For example, a typical device operates from roughly 6 GHz to 13 GHz with about 28 dB gain and saturated output power near 33 dBm.
The table below lists representative AMCOM driver amplifier models with frequency range, gain, output power, bias requirements, and package options. Click the PDF icon to open the corresponding datasheet.
| Model Number | Fmin (GHz) | Fmax (GHz) | Gain (dB) | Pout (dBm) | Bias (V) | Package | Spec Sheet |
|---|---|---|---|---|---|---|---|
| AM06013033WM-QN5-R | 6 | 13 | 28 | 33 | +8 / -0.75 | QFN |  |
| AM00010037WN-00-R | 0 | 10 | 13 | 37 | +28 / -1.8 | Bare Die | |
| AM00010037WN-SN-R | 0 | 10 | 13 | 37 | +28 / -1.8 | Flange | |
| AM00020026WM-00-R | 0 | 20 | 13.5 | 26 | +15 / +4 / -0.8 | Bare Die | |
| AM00020026WM-QN5-R | 0 | 20 | 13 | 26 | +15 / +4 / -0.8 | QFN | |
| AM008030WM-XX-R | 0.05 | 9.5 | 18 | 30 | +12 / -0.7 | SMT/Flange | |
| AM009023WM-XX-R | 0.05 | 9 | 21 | 23 | +12 / -0.7 | SMT/Flange | |
| AM009024WM-QN5-R | 0.05 | 9 | 22 | 25 | +12 / -0.7 | QFN | |
| AM009530WM-QN5-R | 0.05 | 9.5 | 20 | 30.5 | +12 / -0.7 | QFN | |
| AM02018026WM-00-R | 2 | 18 | 23.5 | 26 | +15 / -0.85 | Bare Die | |
| AM02018026WM-QN5-R | 2 | 18 | 23 | 26 | +15 / -0.85 | QFN | |
| AM06013033WM-00-R | 6 | 13 | 28 | 33 | +8 / -0.75 | Bare Die | |
| AM06013033WM-FM-R | 6 | 13 | 27 | 33 | +8 / -0.75 | Flange | |
