BZ-P052600-500852-202525 | B&Z Technologies amplifier | 50–26000 MHz. View manufacturer specifications and request an Impulse quotation.
BZ-P052600-500852-202525 | B&Z RF Amplifier
In Stock
ENGINEERING DATA / BZ-P052600-500852-202525
SPECIFICATION WORKSPACE
Technical data, resources and engineering actions for this exact catalog model.
B&Z TECHNOLOGIESIN STOCKLimited DATA COVERAGE
01
KEY SPECIFICATIONSCatalog values for BZ-P052600-500852-202525
Frequency0.05–26 GHz
Control, view your RFQ cart, or email Impulse Sales about this model.
ENGINEERING USE: Confirm mechanical interface, environmental requirements, qualification level and application-specific limits before final design release. Published catalog values remain controlling where differences exist.
03 / NEXT ACTIONMOVE FROM PART DATA TO AN ENGINEERING DECISION.
COMPARECompare This ProductOpen the 4-product SpecMatch comparison →
ALTERNATIVESFind Equivalent PartsUse CrossMatch against this model →
MODIFY / BUILDCustom RequirementSend an engineering requirement →
PROCUREMENTAdd to RFQ
Description
B&Z Technologies BZ-P052600-500852-202525
Manufacturer-listed RF amplifier electrical specifications. Confirm final documentation, configurations and availability through Impulse Technologies.
Electrical Specifications
| Frequency Min | 50 MHz |
|---|---|
| Frequency Max | 26000 MHz |
| Gain Min | 52 dB |
| Gain Flatness (±) | 3 dB |
| Noise Figure Max | 5 dB |
| P1dB Min | 8 dBm |
| Input VSWR | 2.5:1 |
| Output VSWR | 2.5:1 |
DC Power Requirements
| Manufacturer-listed supply voltage | 12–15 VDC (current model listing) |
|---|---|
| Manufacturer-listed supply current | 355 mA |
Confirm biasing, connector interfaces, and the revision applicable to the ordered unit with Impulse Sales.
Manufacturer Documentation
B&Z manufacturer datasheet (PDF)
Manufacturer-listed mechanical outlines: 100118 (Cascaded 2X); 100171 (Cascaded on heatsink); 100161 (Cascaded). These are documented options, not proof of the exact mechanical configuration supplied. Verify final dimensions, RF connectors and mounting requirements.
Manufacturer-source clarification: The current model listing allows 12–15 V and lists gain flatness ±3 dB. Its linked PDF documents a +15 V unit, 355 mA and ±2 dB maximum flatness. The representative photograph depicts the manufacturer’s model-linked 100161 cascaded housing, not a verified photograph of the tested or shipped configuration. Confirm the ordered revision.
Request a Quote
Use this product’s Request a Quote control, view your RFQ cart, or email Impulse Sales about this model.
