BZ-00010250-201527-202020 | 10–2,500 MHz per manufacturer PDF (see discrepancy note). Minimum gain 27 dB; maximum noise figure 2 dB; output P1dB minimum 15 dBm. Manufacturer specification listing. Check the manufacturer’s conflicting minimum-frequency figures before ordering.
BZ-00010250-201527-202020 | B&Z RF Amplifier
In Stock
ENGINEERING DATA / BZ-00010250-201527-202020
SPECIFICATION WORKSPACE
Technical data, resources and engineering actions for this exact catalog model.
B&Z TECHNOLOGIESIN STOCKLimited DATA COVERAGE
01
KEY SPECIFICATIONSCatalog values for BZ-00010250-201527-202020
Frequency0.01–2.5 GHz
Controlon this product page, or send the exact model and RFQ requirements directly to Impulse Sales. Review
ENGINEERING USE: Confirm mechanical interface, environmental requirements, qualification level and application-specific limits before final design release. Published catalog values remain controlling where differences exist.
03 / NEXT ACTIONMOVE FROM PART DATA TO AN ENGINEERING DECISION.
COMPARECompare This ProductOpen the 4-product SpecMatch comparison →
ALTERNATIVESFind Equivalent PartsUse CrossMatch against this model →
MODIFY / BUILDCustom RequirementSend an engineering requirement →
PROCUREMENTAdd to RFQ
Description
B&Z Technologies BZ-00010250-201527-202020 | RF Amplifier
Model-specific manufacturer data: 10–2,500 MHz per manufacturer PDF (see discrepancy note), minimum gain 27 dB, maximum noise figure 2 dB, and minimum P1dB 15 dBm.
Manufacturer document discrepancy: The manufacturer’s PDF specifies 0.01–2.5 GHz (10–2500 MHz), while the online model record currently lists a minimum of 0.01 MHz. Impulse will confirm the minimum operating frequency before quoting. Do not use the unconfirmed lower limit for engineering design.
Electrical Specifications
| Manufacturer | B&Z Technologies |
|---|---|
| Exact manufacturer part number | BZ-00010250-201527-202020 |
| Minimum operating frequency | 10 MHz per datasheet; manufacturer web listing states 0.01 MHz—discrepancy requires written confirmation |
| Maximum operating frequency | 2,500 MHz |
| Minimum gain | 27 dB |
| Gain flatness | ±2 dB |
| Maximum noise figure | 2 dB |
| Minimum output P1dB | 15 dBm |
| Input VSWR | 2:1 |
| Output VSWR | 2:1 |
| Supply voltage | 8–15 VDC per datasheet |
| Current | 150 mA typical |
Product Documentation
Manufacturer product listing | B&Z model datasheet (PDF)
Image: Representative B&Z standard amplifier housing; actual model configuration, dimensions and connectors may vary. Confirm outline drawing before procurement.
Request a Quote from Impulse
Use the Add to Quote control on this product page, or send the exact model and RFQ requirements directly to Impulse Sales. Review your RFQ Cart.
