BZ-00102000-251234-152020 | B&Z Technologies amplifier | 100–20000 MHz. View manufacturer specifications and request an Impulse quotation.
BZ-00102000-251234-152020 | B&Z RF Amplifier
In Stock
ENGINEERING DATA / BZ-00102000-251234-152020
SPECIFICATION WORKSPACE
Technical data, resources and engineering actions for this exact catalog model.
B&Z TECHNOLOGIESIN STOCKLimited DATA COVERAGE
01
KEY SPECIFICATIONSCatalog values for BZ-00102000-251234-152020
Frequency0.1–20 GHz
Flanged SMA enclosure). The existing product image is illustrative and not verified as the exact shipped u
Control, view your RFQ cart, or email Impulse Sales about this model.
ENGINEERING USE: Confirm mechanical interface, environmental requirements, qualification level and application-specific limits before final design release. Published catalog values remain controlling where differences exist.
03 / NEXT ACTIONMOVE FROM PART DATA TO AN ENGINEERING DECISION.
COMPARECompare This ProductOpen the 4-product SpecMatch comparison →
ALTERNATIVESFind Equivalent PartsUse CrossMatch against this model →
MODIFY / BUILDCustom RequirementSend an engineering requirement →
PROCUREMENTAdd to RFQ
Description
B&Z Technologies BZ-00102000-251234-152020
Manufacturer-listed RF amplifier electrical specifications. Confirm final documentation, configurations and availability through Impulse Technologies.
Electrical Specifications
| Frequency Min | 100 MHz |
|---|---|
| Frequency Max | 20000 MHz |
| Gain Min | 38 dB |
| Gain Flatness (±) | 1.8 dB |
| Noise Figure Max | 2.3 dB |
| P1dB Min | 10 dBm |
| Input VSWR | 2:1 |
| Output VSWR | 2:1 |
DC Power Requirements
| Manufacturer model-listing supply voltage | 12–15 VDC |
|---|---|
| Manufacturer model-listing supply current | 165 mA (current manufacturer model listing) |
Confirm the required bias conditions and currently applicable manufacturer revision before operation.
Manufacturer Documentation
B&Z manufacturer datasheet (PDF)
Manufacturer-listed mechanical outlines: 100140 (Standard male/female); 100114 (Standard housing); 100169 (Standard on heatsink); 100141 (Flanged SMA enclosure). The existing product image is illustrative and not verified as the exact shipped unit. Confirm interface, housing revision and heatsink selection with Impulse Sales.
Revision discrepancy: The linked manufacturer’s historical PDF specifies 115 mA for the documented unit, whereas the manufacturer’s current online model listing specifies 165 mA. Its gain values also differ (PDF minimum 34 dB, typical 35 dB; current model listing minimum 38 dB). Confirm the applicable revision and exact unit specifications with Impulse Sales before quoting or powering.
Request a Quote
Use this product’s Request a Quote control, view your RFQ cart, or email Impulse Sales about this model.
